The madd mexican is out of the water. Has been a average year but hose connection to out drive is toast. Anyone out there know if its an easy fix. I have found the part and im willing to do it myself if i can. Part is 34 bucks. Shop time is brutal. Anyone help or know..
Hey MM, What brand of outdrive do you have? Generally a one size fits all dual "suction cup" model will supply enough water to safely flush your engine.
The Outdoor Line on 710 ESPN Seattle 6-9am Every Saturday!
Nelly wrote:Hey MM, What brand of outdrive do you have? Generally a one size fits all dual "suction cup" model will supply enough water to safely flush your engine.
Nelly, I suspect he is talking about the hydralic hoses to trim the outdrive. I haven't done one before so I don't have any advice, but it shouldn't be to hard. Not sure how you bleed them down once you get them on.... L8R Dan
Ok, update bought part. But as most of you know and do. Had to friggen work ( loading cans). But part simple, i was told. connection hose for engine cool. Hose is fine. Nipple of connector gone.
Sounds like you're working on a Volvo outdrive there MM. While we're at it you may take a hard look at the bellows too. And then there's the lower gearcase lube...
The Outdoor Line on 710 ESPN Seattle 6-9am Every Saturday!