Lowrance deep clean?

A forum for boat owners or aspiring boat owners wanting to discuss boating, boats, equipment, electronics, insurance, maintenance, and more.Image

Lowrance deep clean?

Postby mitch184 » Mon Apr 08, 2013 5:23 pm

The HDS8 on my sled has seen some 'questionable' activity over the years from eggs, brine, prawn cure, blood (mine and fish), salt, etc. I've always let rain do some cleaning and then carefully wiped it down. BUT..... after a recent incident with some blue badazz herring brine..... I'm thinking a deep clean might be in order.

Are there any Lowrance dealers local that do such a thing? I'm not exactly how the thing is sealed up and I really don't want to have to.

Any ideas?
mitch184
Pollywog
 
Posts: 38
Joined: Thu Jan 20, 2011 9:19 am

Re: Lowrance deep clean?

Postby Nelly » Mon Apr 08, 2013 7:15 pm

Wow, great question clap

Ever since the first LCD units came out and were less than water-resistant :roll: I've been pretty careful with my "electronics hygene". The latest Lowrance HDS displays are much, much better but you still want to avoid completely submersing the unit.

I'm guessing you're not referring to the screen but rather the housing and I would go with nothing stronger than hot, soapy water.

Check out Lowrance.com for other tips and meanwhile, I'm going to dive into an HDS operators manual and poke around :mrgreen:
The Outdoor Line on 710 ESPN Seattle 6-9am Every Saturday!
User avatar
Nelly
Spawned Out Boot
 
Posts: 2261
Joined: Tue Dec 28, 2010 9:04 am

Re: Lowrance deep clean?

Postby House » Wed Apr 10, 2013 6:43 am

Hey Mitch, here's some help from the factory:

"The best thing is just a good washing with a mild detergent and water mixture. Do not submerse the unit in water and if there is gunk in the crevices a soft bristled tooth brush works great. "

GREG HUNTER | c.s. TECHNICAL OPERATIONS SUPERVISOR | NAVICO AMERICA

And, this from the Product Manual:

Cleaning the display unit
The supplied cleaning cloth should be used to clean the screen,
where possible.
Where marks on the screen can’t be removed by the cloth alone, use
a 50/50 mixture of warm water and isopropyl alcohol to clean the
screen. Avoid any contact with solvents (acetone, mineral turpentine etc.), Ammonia-based or vinegar-based cleaning products as they may damage the anti-glare layer, plastics bezel, or rubber keys.

To prevent UV damage to the plastic bezel and rubber keys, it is
recommended that the sun cover be fitted when the unit is not in
use for an extended period.

Checking the keys
Make sure that no keys are stuck in the down position. If one is
stuck, wiggle the key to free it back to normal.

Checking the connectors
The connectors should be checked by visual inspection only.
Push the connector plugs into the connector, if the connector plugs
are equipped with a lock; ensure that this is in the correct position.

Hope that helps! thumbup
User avatar
House
FYI
 
Posts: 265
Joined: Wed Apr 20, 2011 6:30 pm

Re: Lowrance deep clean?

Postby mitch184 » Wed Apr 10, 2013 4:45 pm

Thanks guy. That helps a lot.
mitch184
Pollywog
 
Posts: 38
Joined: Thu Jan 20, 2011 9:19 am


Return to Boat Owners Forum

Who is online

Users browsing this forum: No registered users and 5 guests